3D print the Edward Mooney House
A free, printable model of the Edward Mooney House, a small building among closely packed blocks and streets, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Edward Mooney House in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 6 mm
- Scale
- 1:3,750
6 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A small house in a crowded block
The house is low and compact beside much taller neighbors. A larger print size helps its roofline and small details stay readable, and Full detail keeps every modeled feature.
- One piece with the ground
The Edward Mooney House is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Edward Mooney House takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Edward Mooney House
The Edward Mooney House is at 18 Bowery, on the corner of Pell Street, in Manhattan's Chinatown. Wealthy butcher Edward Mooney had it built between 1785 and 1789, on land he bought after it was confiscated from the British Loyalist James De Lancey.
Combining Georgian and Federal styles, the brick house is described as New York City's earliest surviving Early Federal townhouse. Its three stories sit above a full basement and below an attic. Mooney made his living at nearby slaughterhouses, holding pens and tanneries, and he occupied the home until he died around 1800.
In 1807, an addition at the rear doubled the size of the house. It was a private residence until the 1820s, and afterward it became, at different points, a hotel, a brothel and a saloon. New York City designated it a landmark in 1966, and its National Register of Historic Places listing came in 1976.
About this model
The Edward Mooney House is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Same skyline





