3D print the Empire Theatre, 42nd Street
A free, printable model of the Empire Theatre, almost hidden among the tall towers near Times Square, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Empire Theatre, 42nd Street in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 10 mm
- Scale
- 1:3,750
10 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Almost hidden among towers
In these renders the theater is a small building nearly lost among much taller towers. A larger print keeps its facade detail visible, and a layer height of 0.12-0.16 mm keeps edges crisp.
- One piece with the ground
The Empire Theatre, 42nd Street is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Empire Theatre, 42nd Street takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Empire Theatre, 42nd Street
Once a Broadway house, the Empire Theatre began as the Eltinge Theatre and stood at 234 West 42nd Street in Midtown Manhattan's Theater District. Thomas W. Lamb designed it for A. H. Woods, a Hungarian-born impresario, and it opened in 1912. It was named for Julian Eltinge, a female impersonator with whom Woods was associated. Its first night, September 11, 1912, brought the play Within the Law, and in its early years it was known as a "lucky house".
The terracotta facade is square and fairly plain for a theater of its day. At the center is a three-story arch meant to recall a Roman triumphal arch, with a fourth story used for offices. The auditorium held about 900 seats on three levels and was decorated with Egyptian and Greek details of the ancient world, plus a sounding board showing three dancing women.
During the Depression, Max Rudnick leased the theater for burlesque from 1931 until 1942, and Bud Abbott and Lou Costello first performed together here in early 1935. The Brandt family later ran it as a movie house and renamed it the Empire in 1954. In 1998 the building was moved 168 feet (51 m) west, where it serves as the entrance for the AMC Empire 25 multiplex, which opened on April 21, 2000.
About this model
The Empire Theatre, 42nd Street is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Outside the United States this design may still be protected; check the rules where you sell.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Same skyline





