3D print the Federal Office Building
A free, printable model of the Federal Office Building, a large block with rows of arched windows and a stepped roof, and the buildings around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 15 mm
- Scale
- 1:3,750
15 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Rows of arched windows
Tall arched windows run in tight rows around the whole facade. Print friendly adapts them to the print scale; Full detail and a layer height of 0.12–0.16 mm keep them crisp on a bigger print.
- Corner chimney and roof steps
A small chimney stands at one roof corner above the stepped, open-centered roof. Print slowly so the thin chimney and roof edges stay clean.
- One piece with the ground
The Federal Office Building is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Federal Office Building takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Federal Office Building
In Manhattan's West Village stands the Federal Office Building, a residential building that is also called the United States Appraisers' Warehouse and The Archive. It has ten stories in the Romanesque style, and four streets bound it: Christopher, Greenwich, Barrow and Washington. Willoughby J. Edbrooke prepared the designs. He died before the building was finished, yet his influence, and that of the Chicago School of Architecture, shows in it.
Congress authorized construction in 1888. Work began in 1892 under Edbrooke and covered the first two floors, finished in 1894. Eight more floors followed between 1896 and 1898. The building served as a storehouse where customs agents examined imported goods to set their valuations and duties, and the first design placed an open court at its center to bring light and air inside.
The government converted the building into offices in the 1930s, calling it the United States Federal Building. It housed several agencies, among them the National Archives and Records Administration. Those agencies left during the 1970s and 1980s, and in 1982 the Urban Development Corporation bought the building. It was converted to residential use with an added atrium, a project completed in 1988.
About this model
The Federal Office Building is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
