A white 3D print of the Former Hokkaidō Government Office, a domed building in a park with ponds, surrounded by taller city blocks and streets.

3D print the Former Hokkaidō Government Office

A free, printable model of the Former Hokkaidō Government Office, a domed building in a park with ponds, and the taller city blocks around it, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Former Hokkaidō Government Office model, North view North
  • Former Hokkaidō Government Office model, East view East
  • Former Hokkaidō Government Office model, South view South
  • Former Hokkaidō Government Office model, West view West

© OpenStreetMap contributors · Terrain in Japan: 出典:国土地理院 (GSI elevation data via Mapterhorn)

The model you print

Former Hokkaidō Government Office in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

Real height
33 m
On a 160 mm print
9 mm
Scale
1:3,750

33 m of the Former Hokkaidō Government Office, 9 mm on your shelf

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Octagonal dome and cupola

    The dome and the small cupola on top are thin, tall parts. Print friendly adapts them to the print scale; Full detail keeps them for larger prints. Print slowly so the top cools well.

  2. Busy roofline

    Several small gables and roof projections cluster around the dome. A bigger print and a layer height of 0.12-0.16 mm keep them crisp.

  3. One piece with the ground

    The Former Hokkaidō Government Office is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Former Hokkaidō Government Office takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Former Hokkaidō Government Office

The Former Hokkaidō Government Office stands in Sapporo, Japan. Its story begins with the Kaitakushi, a commission that developed and governed Hokkaidō, set up in 1869, whose main office moved to Sapporo in 1871. Horace Capron, an American advisor to the commission, planned an office building topped by an octagonal dome, then a fashionable look in the United States. That first building went up in 1873 and was among the largest in Japan then, but a fire destroyed it in 1879.

After the Kaitakushi was abolished in 1882, Hokkaidō was split into several prefectures, and a Hokkaidō Government was set up in 1886. Its new office opened in 1888, built of red bricks and crowned by an octagonal dome, which the first governor, Michitoshi Iwamura, had proposed. The air vents and dome were taken off in 1896, and a fire gutted the interior in 1909, though the brick walls survived with little damage. Restoration began in 1910 and was completed in 1911.

For the prefecture's 100th anniversary in 1968, the original air vents and dome were put back, and the building was listed the following year as a National Important Cultural Property. It measures 61 meters across the front, 36 meters deep and 33 meters high to the top of the tower. Around 2.5 million red bricks made in Toyohira and Shiroishi form its walls, and 20 paintings inside show important scenes from the history of Hokkaidō.

About this model

The Former Hokkaidō Government Office is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Keep exploring

More landmarks to print

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits