A white 3D print of the Franciscan Church, Salzburg, a church with a slender spire and a polygonal roofed choir, tightly surrounded by the tall buildings of the old town.

3D print the Franciscan Church, Salzburg

A free, printable model of the Franciscan Church in Salzburg, with its slender spire and the dense old-town buildings that surround it, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Franciscan Church, Salzburg model, North view North
  • Franciscan Church, Salzburg model, East view East
  • Franciscan Church, Salzburg model, South view South
  • Franciscan Church, Salzburg model, West view West

© OpenStreetMap contributors

The model you print

Franciscan Church, Salzburg in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
23 mm
Scale
1:3,750

23 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. A slender spire

    The tall, thin tower with its needle-like spire is the most delicate part of this model. Print slowly with good cooling, and use a 0.12–0.16 mm layer height so the tip stays crisp.

  2. Hemmed in by the old town

    Dense buildings stand right against the church, so the spire is the main feature that rises above them. A larger print size keeps it from getting lost among the neighbors.

  3. One piece with the ground

    The Franciscan Church, Salzburg is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Franciscan Church, Salzburg takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Franciscan Church, Salzburg

The Franciscan Church (Franziskanerkirche) in Salzburg, Austria, ranks among the city's oldest churches. It stands in the Altstadt, where Franziskanergasse meets Sigmund-Haffner-Gasse, facing the Franciscan Friary. A first church was built here in the eighth century, in the days of Saint Virgil, who possibly used it for baptisms, and a document of 1139 mentions a parish church on the site, which fire destroyed in 1167.

Building of the central nave in the late-Romanesque style began in 1208, and it was consecrated in 1221, which places it among Salzburg's oldest buildings. From 1408 to 1450 the Romanesque choir gave way to a Gothic one, and a slender Gothic tower followed between 1468 and 1498. The church, dedicated to the Virgin Mary, remained the parish church until 1635, and in 1642 it passed to the Franciscan Order.

Archbishop Max Gandolf of Kuenburg, in 1670, had the top of the tower taken off, since it rose higher than the cathedral's tower. Joseph Wessiken restored it in the neo-Gothic style in 1866. In the eighteenth century Johann Bernhard Fischer von Erlach gave the interior a baroque redesign and decorated the nine chapels of the choir.

About this model

The Franciscan Church, Salzburg is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Keep exploring

More landmarks to print

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits