3D print Hangar-7
A free, printable model of the glass dome and its two round towers, with the airport grounds and roads around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About Hangar-7
Next to Salzburg Airport in Austria stands Hangar-7, a venue for events that doubles as a gallery and museum. Red Bull GmbH built it to unite arts, aviation and the culinary arts. Its rotating exhibitions show historical airplanes, helicopters and Formula One racing cars, and inside are the Ikarus restaurant, two bars and a lounge.
Red Bull founder Dietrich Mateschitz first developed it while seeking room for The Flying Bulls, which is both a private aircraft collection and a performance aviation fleet. The building was designed specifically for that fleet: its 40 m wide door allows the largest plane, a Douglas DC-6B, to fit inside.
Volkmar Burgstaller designed the building. It has an airfoil shape and is built from 1,200 tons of steel, with a glass surface of 75,000 sqft. The Austrian specialists Waagner-Biro engineered and built the dome-shaped steel-and-glass structure, finishing it in 2003. The venue also hosts regular Red Bull events, among them Paper Wings, which is about folded paper airplanes.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 6 mm | 1:3,750 |
| 200 mm | 7 mm | 1:3,000 |
| 256 mm | 9 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Fine grid over the dome
- A fine grid of steel lines covers the curved dome. Print friendly keeps the thin lines sturdy; Full detail suits larger prints and a fine nozzle.
- Smooth curves and round towers
- The dome has smooth curved edges, with two round towers on one side. Layers of 0.12-0.16 mm keep the curves smooth.
- One piece with the ground
- Hangar-7 is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Hangar-7 takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
Hangar-7 is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a Hangar-7 STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. Hangar-7 grows with the print: about 6 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
