Freedom Monument (Riga) in 3D
The Freedom Monument (Riga) appears in city models you make here; its design may still be protected, so it isn't offered as a separate download.
-
North
-
East
-
South
-
West
Copyright notice
The design of Freedom Monument (Riga) may still be protected by copyright. It appears in the city models you make here, but it is not offered as a separate model.
- Real height
- 42 m
- On a 160 mm print
- 11 mm
- Scale
- 1:3,750
42 m of the Freedom Monument (Riga), 11 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Slender column and figure
The tall travertine column ends in a thin figure of Liberty with raised stars. Print it slowly with good cooling, and use a layer height of 0.12-0.16 mm to keep the top crisp.
- Sculpture groups on the base
Small sculpture groups sit around the stepped base. Print friendly adapts these to the print scale; a bigger print or Full detail keeps more of them.
- One piece with the ground
The Freedom Monument (Riga) is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Freedom Monument (Riga) takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Freedom Monument (Riga)
In Riga, Latvia, the Freedom Monument honors soldiers who died in the country's War of Independence, fought from 1918 to 1920. Many regard it as a key symbol of Latvia's freedom, independence and sovereignty. Unveiled in 1935, it stands 42 meters (138 ft) high, made of granite, travertine and copper, and Riga's public gatherings and official ceremonies often center on it.
Its sculptures and bas-reliefs, set in thirteen groups, show scenes from the culture and history of Latvia. At its core is a stack of tetragonal shapes that shrink toward the top, topped by a 19-meter (62 ft) travertine column that carries Liberty, a copper figure holding up three gilded stars. The design that was built came from the Latvian sculptor Kārlis Zāle, whose scheme title, "Mirdzi kā zvaigzne!", means "Shine like a star!" Private donations paid for the construction.
After the 1940 Soviet occupation of Latvia, the monument was weighed for demolition, but nothing was done. During the Soviet era it stayed a symbol of national independence for the public, and on June 14, 1987, about 5,000 people gathered there to lay flowers. That rally renewed the independence movement, which led three years later to the re-establishment of Latvian sovereignty.
About this model
The Freedom Monument (Riga) is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Same skyline




