A white 3D print of St. John's Church, Riga, a long church with a steep roof, a slender spire and a stepped gable, hemmed in by closely packed buildings.

3D print St. John's Church, Riga

A free, printable model of St. John's Church, Riga, a long church with a steep roof, slender spire and stepped gable, hemmed in by buildings, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • St. John's Church, Riga model, North view North
  • St. John's Church, Riga model, East view East
  • St. John's Church, Riga model, South view South
  • St. John's Church, Riga model, West view West

© OpenStreetMap contributors

The model you print

St. John's Church, Riga in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
13 mm
Scale
1:3,750

13 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Slender spire and belfry

    A thin spire rises over an open belfry. Print friendly adapts the spire to the print scale; Full detail keeps it on a larger print. Printing slowly helps the thin tip.

  2. Stepped gable and tall windows

    The gable steps up in small pinnacles, and tall narrow windows line the walls. A layer height of 0.12–0.16 mm and a bigger print size keep them crisp.

  3. One piece with the ground

    St. John's Church, Riga is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. St. John's Church, Riga takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About St. John's Church, Riga

St. John's Church, in Latvia's capital Riga, is Lutheran and belongs to the Evangelical Lutheran Church of Latvia as a parish church. Its address is 24 Skārņu Street. The church honors St John the Baptist and holds several artworks linked to him, including a big painting by the north side of the crossing, plus a stained glass window, installed around 1900, to the right of the high altar.

The church was built on the site of Albert of Riga's bishop's palace, dating from the thirteenth century. Dominican friars took over the small original chapel in 1234 and named it for John the Baptist. Around 1330 the building grew. It stayed a Dominican chapel and parish church up to 1523, the time of the Reformation, then continued as a Lutheran parish church. Further expansion began in 1587. Riga's great city fire of May 31, 1677 damaged it badly, and it was repaired with a new spire.

Joris Jorissen Frese was architect of the interior and exterior from 1586 to 1589. He probably took inspiration for the rustication and mosaic friezes on the façade from the Architectura of Hans Vredeman de Vries (Antwerp, 1577). The church also works as a concert venue, thanks to its large size and good acoustics.

About this model

St. John's Church, Riga is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Same skyline

More landmarks in Riga

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits