A white 3D print of Brookfield Place, a tall tower with exposed diagonal steel framing and an open frame at its top, standing among other city towers and lower buildings.

Brookfield Place in 3D

Brookfield Place appears in city models you make here; its design may still be protected, so it isn't offered as a separate download.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Brookfield Place model, North view North
  • Brookfield Place model, East view East
  • Brookfield Place model, South view South
  • Brookfield Place model, West view West

© OpenStreetMap contributors

Copyright notice

The design of Brookfield Place may still be protected by copyright. It appears in the city models you make here, but it is not offered as a separate model.

On a 160 mm print
65 mm
Scale
1:3,750

65 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Open frame on the crown

    The steel frame on the east and west sides and the open framework at the top are thin parts. Full detail at a large size keeps them; Print friendly thickens them for small prints.

  2. Tall, narrow tower

    This is a tall, slim model. Print slowly with good cooling, and use 0.12–0.16 mm layers to keep the vertical lines of the façade crisp.

  3. One piece with the ground

    Brookfield Place is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Brookfield Place takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About Brookfield Place

The Brookfield Place tower rises within the office complex of the same name in Perth, Western Australia, at 125 St Georges Terrace. Construction began in April 2008 and ended in 2012, at an estimated cost of around A$500 million. BHP signed Perth's largest-ever office lease in December 2007, covering 60,000 square meters (650,000 sq ft).

Among commercial buildings whose core sits to one side, it is called the tallest both worldwide and in the southern hemisphere. Hassell and Fitzpatrick + Partners designed it, and the project also restored the Newspaper House Group of Buildings that surround it, four heritage-listed buildings built from 1910 to 1932. The offset core shields the façade from the adverse northern sun and solar heat gain, while exoskeletons on the east and west sides give the tower its distinctive look. The structure ends in a tapered roof crown.

A second tower, designed by Woods Bagot, was completed in 2015, south of the main tower and fronting Mounts Bay Road. It is a 16-story office tower of 30,000 square meters (320,000 sq ft), with floor plates of about 2,100 square meters (23,000 sq ft) and no columns. A covered walkway at upper level crosses Mounts Bay Road, linking the Elizabeth Quay bus and railway stations with the Perth CBD.

About this model

Brookfield Place is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Same skyline

More landmarks in Perth

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits