3D print Funerary complex of Sultan Barquq
A free, printable model of the Funerary complex of Sultan Barquq in Cairo and the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Funerary complex of Sultan Barquq in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 15 mm
- Scale
- 1:3,750
15 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Slim parts and small details
Slim or tall parts can be fragile on a small print. Print friendly adapts thin parts to the print scale; Full detail suits larger prints. Print slowly for tall thin parts.
- One piece with the ground
Funerary complex of Sultan Barquq is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Funerary complex of Sultan Barquq takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Funerary complex of Sultan Barquq
Located in Cairo's historic district, in Egypt, the Funerary complex of Sultan Barquq is an Islamic religious complex. Sultan al-Zahir Barquq, the first ruler of the Mamluk Burji line, commissioned it. Like most Mamluk foundations it served several functions. Its foundation deed describes a Friday mosque, a madrasa for 125 students, and a khanqah (a hospice) for sixty Sufis. A domed mausoleum chamber is attached.
The complex stands on al-Mu'izz street in an area called Bayn al-Qasrayn, right beside two earlier monuments: Sultan Qalawun's funerary complex together with the Madrasa of Al-Nasir Muhammad. Together they form a long, continuous line of religious complexes. Construction began in December 1384 and finished in April 1386, after existing buildings on the site, including a caravanserai, were demolished. Ahmad al-Tuluni was the master builder, and reportedly only paid workers were employed.
The eastern iwan holds the main prayer hall, covered by a single wooden roof that is the largest in Mamluk architecture. Its richly painted and carved ceiling is considered an outstanding feature. The mausoleum dome was originally made of wood and was rebuilt in brick in 1893. Barquq himself later preferred a new mausoleum in Cairo's Northern Cemetery, which his son Faraj completed, though he ended up buried in a different funerary complex.
About this model
Funerary complex of Sultan Barquq is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
