3D print Glencoe, Newark
A free, printable model of Glencoe, the Coe Mansion, shown with the buildings and streets around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 6 mm
- Scale
- 1:3,750
6 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Ornate roofline and small details
The house has a busy roofline with small gables and fine facade detail. Print friendly adapts thin parts to your print scale; Full detail keeps every feature for larger prints, and a layer height of 0.12-0.16 mm keeps them crisp.
- One piece with the ground
Glencoe, Newark is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Glencoe, Newark takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Glencoe, Newark
Glencoe, also known as the Coe Mansion, stands in Newark, in Essex County, New Jersey, United States. It is a historic building that was built in 1871. Beyond its name, location and construction date, the record offers few details about its original owners or its use over the years.
The National Register of Historic Places listed the building on October 1, 1991, and it appears among the register's listings for Essex County. Its architectural style is recorded as Renaissance Revival, and the listing identifies it simply as a building in New Jersey.
About this model
Glencoe, Newark is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
