3D print the Golden Gate, Vladimir
A free, printable model of the Golden Gate in Vladimir, a gate with a small dome on top and round corner towers, among the surrounding streets, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Golden Gate, Vladimir in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 9 mm
- Scale
- 1:3,750
9 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Small dome and slim cross
A small dome with a thin cross sits on top of the gate. Print friendly adapts thin parts like this to your print scale; a larger print or Full detail keeps them as modeled.
- Small arched windows and round towers
Round towers at the corners carry tiny arched windows and fine cornice lines. A layer height of 0.12–0.16 mm keeps these crisp, and a bigger print keeps more of them.
- One piece with the ground
The Golden Gate, Vladimir is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Golden Gate, Vladimir takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Golden Gate, Vladimir
The Golden Gate in Vladimir, known in Russian as Zolotye Vorota, was built from 1158 to 1164. It is the only ancient Russian city gate to have been preserved, though only in part. Inside, a museum covers the Mongol invasion of Russia during the thirteenth century, and the gate itself lived through the destruction of Vladimir by the Mongols in 1237.
Over time the structure weakened so much that, by the end of the 18th century, Catherine the Great feared the arch might fall on anyone passing under it. In 1779 she had precise measurements and drawings of the monument produced. The vaults and the barbican church were torn down in 1795, after long debate. UNESCO added the site to its World Heritage list in 1992.
About this model
The Golden Gate, Vladimir is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
