A white 3D print of the Great Sphinx of Giza lying on flat ground, with roads and blocky buildings around it.

3D print the Great Sphinx of Giza

A free, printable model of the Great Sphinx of Giza and the sandy ground, roads and buildings around it, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Great Sphinx of Giza model, North view North
  • Great Sphinx of Giza model, East view East
  • Great Sphinx of Giza model, South view South
  • Great Sphinx of Giza model, West view West

© OpenStreetMap contributors

The model you print

Great Sphinx of Giza in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

Real height
20 m
On a 160 mm print
6 mm
Scale
1:3,750

20 m of the Great Sphinx of Giza, 6 mm on your shelf

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Paws, head and headdress

    The face and the two paws stretched out in front are the smallest features. Print friendly adapts them to the print scale; Full detail keeps every modeled feature on a larger print.

  2. Long, low body

    The statue is long and low, so a bigger print size keeps the head and chest detail legible, and a 0.12-0.16 mm layer height keeps the curved surfaces smooth.

  3. One piece with the ground

    The Great Sphinx of Giza is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Great Sphinx of Giza takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Great Sphinx of Giza

The Great Sphinx of Giza is a statue of a reclining sphinx, a mythical being with a human head and a lion's body, carved in limestone. It was cut from the bedrock of the Mokattam Formation and looks east, standing on the Giza Plateau along the Nile's west bank in Giza, Egypt. Egypt's oldest known monumental sculpture, it belongs to the Memphite Necropolis and is part of a UNESCO World Heritage Site.

Evidence from archaeology points to Old Kingdom Egyptians making it during the reign of Khufu or of Khafre. Scholars believe the face was carved to depict either Khufu or one of his sons, Djedefre or Khafre, though no consensus has been reached and the question remains in dispute. The Sphinx is a single block of the plateau's own bedrock, and the same plateau supplied stone for the pyramids and other nearby monuments.

From paw to tail it measures 73 m (240 ft), with a height of 20 m (66 ft) from the base to the head top and a width of 19 m (62 ft) across the rear haunches. It has been restored more than once; the most recent restoration replaced layers of limestone blocks at its base. Why the nose is missing is not known, though marks on the face point to deliberate damage with rods or chisels.

About this model

The Great Sphinx of Giza is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Same skyline

More landmarks in Giza

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits