3D print Haddock's Hall
A free, printable model of Haddock's Hall, a brick building with a small tower on its roof, with the lawns, streets and nearby buildings around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 5 mm
- Scale
- 1:3,750
5 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Rooftop tower and chimney
A small square tower and a chimney rise from the roof. Print friendly adapts these small parts to the print scale; a layer height of 0.12–0.16 mm keeps their edges crisp.
- One piece with the ground
Haddock's Hall is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Haddock's Hall takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Haddock's Hall
Haddock's Hall is a historic commercial building in Piermont, in Rockland County, New York. Built about 1875, it is a brick structure two stories tall and three bays wide, topped by a three-story tower. It was first put up to serve as a store, a warehouse and the village hall.
Roger Haddock (1827–1891) commissioned the building from William Henry Hand (1837–1898), who was his brother-in-law. Haddock's business dated to 1857, when he started out in a shop that Major Taulman had founded; the brick building took the place of that earlier shop. People reputed it to be Rockland County's biggest general store.
After Haddock's death the store closed and its contents were auctioned. In 1900 the building became the Hasbrouck Motor Works, which made motors for yachts. From 1926 until 1975 it held a silk mill, run first by the Buser Silk Company, then by the Miesch Silk Manufacturing Co., making ribbons for military decorations and parachute rip cords. It has since been divided into residential apartments, and in 1991 it joined the National Register of Historic Places.
About this model
Haddock's Hall is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
