3D print Harrah's Las Vegas
A free, printable model of Harrah's Las Vegas and the buildings around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About Harrah's Las Vegas
In Paradise, Nevada, near the middle of the Las Vegas Strip, Harrah's Las Vegas combines a hotel with a casino. Holiday Inn was a partner in the original venture. Work started in April 1970. The hotel part opened on February 1, 1972, under the name Holiday Inn Center Strip, and the casino part, the Holiday Casino, followed on July 2, 1973.
The land it stands on once held two motels: the Tumbleweed, dating to 1946, and the Pyramids, dating to 1952. In April 1992 the property took the Harrah's name. At first the casino had a facade styled as a riverboat, and that was made bigger in 1990. A renovation finished in 1997 dropped that theme and brought in a Carnival and Mardi Gras one.
Rooms total 2,542, spread over three buildings. These are the original tower of 14 stories, a second tower of 23 stories finished in 1982, and a third of 35 stories added in 1990. Besides a showroom, the complex includes an outdoor bar and entertainment space called Carnaval Court.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 30 mm | 1:3,750 |
| 200 mm | 37 mm | 1:3,000 |
| 256 mm | 47 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Notched tower top
- The tallest tower has a notched, V-shaped plan with long straight faces. Slow printing and cooling help the top edges stay clean.
- Small roof features
- The low casino block carries small roof features and a curved front. Print friendly adapts them to the print scale; Full detail suits larger prints.
- One piece with the ground
- Harrah's Las Vegas is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Harrah's Las Vegas takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
Harrah's Las Vegas is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a Harrah's Las Vegas STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. Harrah's Las Vegas grows with the print: about 30 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
