A white 3D print of the High Synagogue in Kraków, a tall gabled building with large arched windows, squeezed among steep-roofed neighboring houses and narrow streets.

3D print the High Synagogue (Kraków)

A free, printable model of the High Synagogue in Kraków, a tall gabled building with arched windows, tucked among the steep-roofed houses of Kazimierz, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • High Synagogue (Kraków) model, North view North
  • High Synagogue (Kraków) model, East view East
  • High Synagogue (Kraków) model, South view South
  • High Synagogue (Kraków) model, West view West

© OpenStreetMap contributors

The model you print

High Synagogue (Kraków) in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
6 mm
Scale
1:3,750

6 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Small building, tall gable

    The synagogue is small and boxed in by neighboring houses. A bigger print size keeps its arched windows and decorated gable readable, and a layer height of 0.12–0.16 mm keeps them crisp.

  2. Decorated roof edge

    A row of small ornaments runs along the top of one facade. Print friendly adapts these tiny parts to the print scale; Full detail keeps them on a larger print.

  3. One piece with the ground

    The High Synagogue (Kraków) is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The High Synagogue (Kraków) takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the High Synagogue (Kraków)

The High Synagogue (Synagoga Wysoka), also called the Tall Synagogue after its height, stands in the Kazimierz district of Kraków, Poland, at Jozefa 38 Street. Built in the late Renaissance style and once home to an Orthodox Jewish congregation, it was the third synagogue raised in Kazimierz. A rich merchant whose only recorded name is Israel asked King Sigismund II Augustus for permission to build it and received his consent.

Its prayer rooms were on the upper floor, above shops at street level, and the sanctuary walls were painted with scenes of Jerusalem. It served for worship until World War II; in 1939 the Nazis destroyed its interior. Of its furnishings, only a seventeenth-century Baroque Hanukkah candlestick survived the war. After the war the ceiling and roof were changed and another story was added above the synagogue.

On the eastern wall remains the largest and oldest Renaissance Aron HaKodesh in Poland, topped by an ornament of two griffins. Wall paintings were uncovered by conservators early in the 21st century. Since 2005 the building has been open to visitors as a Jewish museum with exhibitions on interwar Jewish life, and the High Synagogue of Prague was modeled on it.

About this model

The High Synagogue (Kraków) is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Same skyline

More landmarks in Kraków

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits