3D print the Holy Rosary Cathedral (Vancouver)
A free, printable 3D model of Holy Rosary Cathedral and the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Holy Rosary Cathedral (Vancouver) in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 66 m
- On a 160 mm print
- 18 mm
- Scale
- 1:3,750
66 m of the Holy Rosary Cathedral (Vancouver), 18 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Bell towers and tall steeple
A church with bell towers and a tall steeple has thin vertical parts. Tall thin spires print best slowly with good cooling; a larger print size keeps the finest points.
- Fine Gothic detail
Print friendly adapts thin parts to the print scale, while Full detail keeps every modeled feature on a larger print or with a fine nozzle.
- One piece with the ground
The Holy Rosary Cathedral (Vancouver) is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Holy Rosary Cathedral (Vancouver) takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Holy Rosary Cathedral (Vancouver)
Formally named for Our Lady of the Holy Rosary, Holy Rosary Cathedral is a Catholic church in the French Gothic revival style. It is the seat of the Archdiocese of Vancouver, standing downtown where Richards Street meets Dunsmuir Street. Work started in 1899 on the grounds of an earlier church with the same name, and the new building opened on December 8, 1900. It became a cathedral in 1916.
The architects were H.J. Williams and Thomas Ennor Julian, and construction took only 491 days. When it was finished, it drew praise as the finest piece of architecture lying both west of Toronto and also north of San Francisco. Its style has been compared to Chartres Cathedral, the medieval church in France. The plan is cruciform, in the shape of a Latin cross. The outer walls are sandstone from Gabriola Island, and the foundations are granite.
Its two bell towers are asymmetric, and they are called the most prominent visual feature of the building. The taller steeple rises to 217 ft (66 m). The building measures 161 ft (49 m) in length, 104 ft (32 m) in width and 62 ft (19 m) in height. Because a Catholic church can be consecrated only when free of debt, consecration waited until October 3, 1953. The Vancouver Heritage Register lists it, and the building has legal protection.
About this model
The Holy Rosary Cathedral (Vancouver) is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
