3D print Vancouver House
A free, printable model of Vancouver House and the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Vancouver House in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 150 m
- On a 160 mm print
- 45 mm
- Scale
- 1:3,750
150 m of Vancouver House, 45 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A tower that changes shape
The real tower shifts from a triangle at the base to a rectangle at the top. A layer height of 0.12–0.16 mm keeps fine vertical detail crisp on a tall print.
- One piece with the ground
Vancouver House is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Vancouver House takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Vancouver House
Vancouver House is a residential skyscraper in the neo-futurist style, found in Vancouver, British Columbia. The Danish architect Bjarke Ingels designed it with the engineers Buro Happold and Glotman Simpson. Construction began in 2016, and the tower stands 150.3 m tall with 49 floors above ground.
Its shape comes from the site. The plot is a triangle right beside the Granville Street Bridge, just east of its Howe Street on-ramp, and the tower starts as a triangle at the ground and gradually becomes a rectangle toward the top. Box-shaped balconies on the east and west facades give the exterior a honeycomb texture. A public art piece, Spinning Chandelier, was installed near the tower to satisfy a rezoning requirement set by the city.
About this model
Vancouver House is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
