3D print Huntington Harbor Light
A free, printable model of Huntington Harbor Light, a square, castle-like tower with a railed lantern on top, standing in open water, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 13 m
- On a 160 mm print
- 4 mm
- Scale
- 1:3,750
13 m of Huntington Harbor Light, 4 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Railings and lantern
Thin railings circle the lantern and roof parapets, and a small finial tops the lantern. Print friendly adapts these thin parts to the print scale; Full detail keeps them on a larger print. Printing slowly helps.
- Block-patterned base
The base shows fine block courses and arched windows. A layer height of 0.12-0.16 mm and a bigger print size keep them crisp.
- One piece with the ground
Huntington Harbor Light is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Huntington Harbor Light takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Huntington Harbor Light
Huntington Harbor Light, once called Lloyd Harbor Lighthouse, sits off Long Island, New York, in Huntington Bay. A first lighthouse went up in 1857 on the point of Lloyd's Neck, to help ships find shelter in Lloyd Harbor from wind and waves. It did little for vessels heading into the neighboring Huntington Harbor, so a new lighthouse was built in 1912 to serve that harbor.
The 1912 tower was unusual in both design and construction. Its Beaux-Arts styling gives it the look of a small castle, and its reinforced concrete foundation and structure were unique to the area. Builders cast the foundation on land nearby, floated it out and sank it at the site. The tower received a fifth order Fresnel lens in 1912, the year it was first lit.
The Lighthouse Service staffed the tower from 1912 until 1939, and the Coast Guard took over from then. Automation came in 1949, and the empty building began to deteriorate. A 1983 survey judged it unsafe for crews and too costly to repair, and the Coast Guard weighed demolition and a steel tower. In 1985 local citizens formed Save Huntington's Lighthouse, the first private group in the nation to succeed in assuming control of and restoring an offshore lighthouse.
About this model
Huntington Harbor Light is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
