3D print Isaac T. Hopper House
A free, printable model of the Isaac T. Hopper House and the dense blocks of buildings and streets around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 6 mm
- Scale
- 1:3,750
6 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A narrow house in a dense block
The house is small among taller neighbors. A larger print size and Full detail keep its fine detail readable; a layer height of 0.12-0.16 mm helps.
- One piece with the ground
Isaac T. Hopper House is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Isaac T. Hopper House takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Isaac T. Hopper House
Standing on Second Avenue at number 110, between East 6th and East 7th Streets in Manhattan's East Village, this Greek Revival townhouse dates from 1837 and 1838 and began as a rowhouse. It was also called the Mead House, after its first owner. It is the only one still standing of four rowhouses at 106-112 Second Avenue that the extended Mead family used.
In July 1874 the Women's Prison Association bought the house. The association was founded in 1845 by Isaac Tatem Hopper, a Quaker abolitionist and prison reformer, together with his daughter Abigail Hopper Gibbons. The house housed mainly women just out of prison, and the basement held laundry rooms and household work spaces.
The building is 3 1/2 stories high, 25 feet (7.6 m) wide and 125 feet (38 m) deep. Its basement has a brownstone facade, with brick on the three stories above. A front stoop leads to a small brownstone portico with Ionic columns. In 1986 the building entered the National Register of Historic Places, and in 2009 it became a landmark of New York City.
About this model
Isaac T. Hopper House is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
