3D print the Jubilee Synagogue
A free, printable 3D model of the Jubilee Synagogue in Prague, with the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Jubilee Synagogue in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 8 mm
- Scale
- 1:3,750
8 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Small horseshoe arches
The facade is known for horseshoe arches, which are fine details at small sizes. Full detail keeps more of them on a larger print; Print friendly adapts thin parts.
- One piece with the ground
The Jubilee Synagogue is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Jubilee Synagogue takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Jubilee Synagogue
Prague's Nové Město district holds the Jubilee Synagogue, also known as the Jerusalem Synagogue, on Jerusalem Street. It is an active Orthodox Jewish synagogue. It was built in 1906 to a design by Wilhelm Stiassny, with Alois Richte as builder. Its original name marked the golden Jubilee of the Austrian emperor Franz Joseph I's reign in 1898, and it replaced three synagogues destroyed between 1898 and 1906.
Its architecture is Moorish Revival, with Art Nouveau decoration concentrated in the interior. Horseshoe arches mark both the facade and the interior columns that hold up the women's galleries, in a building of three bays. The stone facade stands out for its Mudéjar red-and-white coursing. Inside, vividly painted Art Nouveau patterns cover the Moorish elements.
Once Czechoslovakia declared independence in 1918, it became known as the Jerusalem Synagogue, since the Jubilee name referred to the anniversary of Franz Joseph I's rule. Its original Reform character included an organ and a choir. After an extensive restoration, it opened to tourists on a regular basis on April 1, 2008.
About this model
The Jubilee Synagogue is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
