3D print Jumeirah Mosque
A free, printable model of Jumeirah Mosque, with its large ribbed dome, smaller domes and two slender minarets, among low buildings and roads, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About Jumeirah Mosque
Jumeirah Mosque stands in Dubai, in the United Arab Emirates, in Dubai's Jumeirah district, which lies along the Persian Gulf. Work started in 1975 and the doors opened in 1979. Its design mixes historical Islamic architectural styles, among them Fatimid and Mamluk. Sheikh Rashid bin Saeed Al Maktoum, a former Ruler of Dubai, gave it as a gift to Sheikh Mohammed bin Rashid Al Maktoum, his son and heir.
Abd al-Muʿizz Husayn worked with Muhammad al-Mahdi Hegazy at Hegazy Engineering Consultancy to design it. Yellow-pink sandstone forms the walls. Deep relief carvings decorate the two minarets and the dome; they are typical of Egyptian Mamluk architecture, while official sources cite only Fatimid architecture as the inspiration. One entrance, on Jumeirah Street, is meant for tourists; the other, on the opposite side, is for worshippers arriving to pray. Inside, a hypostyle layout of columns surrounds the central dome, and the interior levels run from beige to yellow to salmon pink to blue as they rise.
The SMCCU, a tourism outreach organization that Sheikh Mohammed founded, oversees the mosque. Up to 1,200 worshippers fit inside. The complex includes a majlis, which is available for rental for special events, and a museum called Once Upon a Time that covers the history of Dubai. The mosque was pictured on the 500 dirham note of the 2003 series.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 10 mm | 1:3,750 |
| 200 mm | 12 mm | 1:3,000 |
| 256 mm | 16 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Two slender minarets
- The two minarets are tall and thin, with small balconies and a finial on top. Print slowly with good cooling; Print friendly adapts them to the print scale.
- A patterned dome and small ornaments
- The large dome has a diamond-patterned surface, and small ornaments line the roof edges. Layers of 0.12–0.16 mm keep them crisp, and Full detail keeps every one on a larger print.
- One piece with the ground
- Jumeirah Mosque is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Jumeirah Mosque takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
Jumeirah Mosque is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a Jumeirah Mosque STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. Jumeirah Mosque grows with the print: about 10 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
