3D print Kamakhya Temple
A free, printable model of Kamakhya Temple and the buildings and open ground around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Kamakhya Temple in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 5 mm
- Scale
- 1:3,750
5 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Several domes and small finials
A cluster of ribbed domes, each topped with a small pointed finial, rises above the roofline. Print friendly adapts the finials to the print scale; Full detail keeps them on a larger print, printed slowly.
- A compact model, so print larger
The temple is low and compact. A bigger print size and a 0.12-0.16 mm layer height keep the dome ribs and wall detail visible.
- One piece with the ground
Kamakhya Temple is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Kamakhya Temple takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Kamakhya Temple
Kamakhya Temple is a Hindu temple on the Nilachal hills in Guwahati, Assam, dedicated to the goddess Kamakhya. It is among the oldest and most respected centers of Tantric practice, and each year it hosts the Ambubachi Mela festival. The Shakta tradition lists 51 pithas, and this temple is one of the four oldest. For much of history it was an obscure place of worship, becoming an important pilgrimage destination during colonial rule in the 19th century.
The temple's structure has been dated to the 8th-9th century, and it was rebuilt many times afterward. The present form, from the 16th century, produced a hybrid local style called Nilachal: a hemispherical dome set over a cruciform base. The shikhara above the sanctum is a polygonal, beehive-like brick dome encircled by minaret-inspired angashikharas. The sanctum lies below ground level and holds a rock fissure rather than an image.
Reconstruction was completed in 1565 under Nara Narayan of the Koch dynasty, after two attempts to restore a stone shikhara failed and the artisan Meghamukdam turned to brick. The main temple is ringed by separate temples for the ten Mahavidyas; three of the goddesses reside inside the main temple, and the other seven have temples of their own.
About this model
Kamakhya Temple is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Keep exploring





