3D print Mysore Palace
A free, printable model of Mysore Palace, its domed towers and the lawns, paths and open ground around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About Mysore Palace
Mysore Palace, also called Amba Vilas Palace, is a royal residence and historic palace in Mysore, Karnataka, India. It was the Wadiyar dynasty's official home and the Kingdom of Mysore's seat. A fire on February 20, 1897, largely destroyed the northern portion of the earlier palace, and a replacement was commissioned in August 1897. Its design is attributed to Henry Irwin, whose earlier work included the Madras High Court, and to Edwin Wolleston Fritchley.
The palace was built from 1897 to 1912. Among the largest palaces in India, it is a prominent Indo-Saracenic building, a style that combines Indo-Islamic, Rajput, Hoysala and Gothic elements. Following state government guidelines, it was made mainly of stone, brick and iron, with few inflammable materials. Renovations in the early 1930s added several square towers, north and south, at the ends of the facade, and enlarged the eastern portico for a redesigned open-view durbar hall.
The grounds have hosted the Mysore Dasara festival every year since the early 19th century, ending with an elephant procession on Vijayadashami. A public museum fills part of the main palace, beside living quarters for the ceremonial head of the Wadiyar dynasty. The complex also holds several gardens and Hindu temples, some of them older than the palace, as well as the original fort's old walls.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 14 mm | 1:3,750 |
| 200 mm | 18 mm | 1:3,000 |
| 256 mm | 23 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Domes and small cupolas
- The roofline carries several domes and rows of small cupolas. Print friendly adapts the smallest ones to the print scale; Full detail keeps them, which suits a larger print. Layers of 0.12 to 0.16 mm keep the curves smooth.
- Rows of shallow arches
- The long facades are lined with rows of shallow arches. A bigger print size keeps their edges distinct, and Full detail keeps every arch.
- One piece with the ground
- Mysore Palace is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Mysore Palace takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
Mysore Palace is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a Mysore Palace STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. Mysore Palace grows with the print: about 14 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
