3D print Kew Palace
A free, printable model of Kew Palace, a low house and its grounds beside the River Thames in London, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 6 mm
- Scale
- 1:3,750
6 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A small house on a big site
The palace is a small, low building, so at small print sizes it has little room for detail. Print it larger, or pick Full detail, to make the most of its shape.
- Layers for the roof edge
On a low building the top edge shows layer stepping first. Layers of 0.12–0.16 mm and a slower print keep that edge clean.
- One piece with the ground
Kew Palace is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Kew Palace takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Kew Palace
Kew Palace is a former royal palace in London, set in Kew Gardens beside the River Thames. Little of the original large complex still stands. The main survivor, a house of 1631 called the Dutch House, sits on an undercroft left by an earlier building, with part of an 18th-century service wing next to it. A former housekeeper's cottage, a brewhouse and a kitchen block stand close by, and most of them are private.
Samuel Fortrey took a lease on the building above that undercroft in 1619. In 1631 he pulled down everything except the undercroft and put up a bigger manor house facing south. A later confusion over Fortrey's ancestry, and the house's architecture, which was supposedly Dutch — Artisan Mannerist, heavy with Dutch gables — gave it the Dutch House name. Royal use ran from about 1728, when Queen Caroline leased it for her three eldest daughters, to 1818, with one brief spell in 1844.
George III bought the freehold in 1781. The house is Grade I listed and visitors can go in; Historic Royal Palaces, an independent charity that gets no money from the government or the Crown, looks after it. Visitors can also see the kitchens, and the charity runs Queen Charlotte's Cottage and the Great Pagoda too.
About this model
Kew Palace is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
