3D print the The Old Vic
A free, printable model of the Old Vic, a low playhouse on a Waterloo street, with the surrounding city blocks, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 5 mm
- Scale
- 1:3,750
5 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A low playhouse on a tight street
The playhouse is a low block, so it carries little height. A larger print gives the front of the house more room for its detail.
- Detail on the street side
Much of what the model carries is on the street front. Full detail keeps it on a big print; Print friendly adapts it when the model is small.
- One piece with the ground
The The Old Vic is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The The Old Vic takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the The Old Vic
The Old Vic is a nonprofit producing playhouse with 1,000 seats in Waterloo, London. It opened in 1818 and took the name Royal Victoria in 1833, under the patronage of Victoria, Duchess of Kent. A rebuild in 1871, with Jethro Thomas Robinson as architect, brought a reopening as the Royal Victoria Palace. Emma Cons took it over in 1880 and ran it as the Royal Victoria Hall.
The Old Vic name was already in informal use in 1880. Cons's niece Lilian Baylis took over its management in 1898 and began a run of Shakespeare productions in 1914. Air raids damaged the building in 1940, and in 1951, after it reopened, it was listed as a Grade II* building.
Its company helped form the National Theatre Company in 1963, under Laurence Olivier. The company stayed until its own South Bank building opened in 1976. The building was refurbished in 1982 and 1983 and sold to a charitable trust in 1998. Kevin Spacey was artistic director from 2003 to 2015, and Matthew Warchus followed him in 2015.
About this model
The The Old Vic is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
