3D print Khalid Al Attar Tower 2
A free, printable model of Khalid Al Attar Tower 2 on Sheikh Zayed Road in Dubai, with the surrounding city generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 294 m
- On a 160 mm print
- 80 mm
- Scale
- 1:3,750
294 m of Khalid Al Attar Tower 2, 80 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Tall tower, fine top
The upper floors and roof carry the smallest detail on this tall tower. Print friendly adapts those parts to the print scale; Full detail keeps them for a large print or a fine nozzle.
- One piece with the ground
Khalid Al Attar Tower 2 is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Khalid Al Attar Tower 2 takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Khalid Al Attar Tower 2
Khalid Al Attar Tower 2 stands on Sheikh Zayed Road in Dubai, in the United Arab Emirates. The building is also known as the Millennium Hotel. It is a skyscraper and tower block, and it stands in the Emirate of Dubai.
The tower has 66 floors, and its total structural height is 294 m (853 ft). Construction was completed in 2011 in Dubai. The completed building is the same one that is also known as the Millennium Hotel, on Sheikh Zayed Road.
About this model
Khalid Al Attar Tower 2 is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
