3D print the Khan Shatyr Entertainment Center
A free, printable model of the Khan Shatyr Entertainment Center, its sloped tent and slender mast among the streets and buildings of Astana, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Khan Shatyr Entertainment Center in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 44 mm
- Scale
- 1:3,750
44 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- The slender mast
The mast rises from the tent on a narrow louvered crown and is the thinnest part of the print. Slow the top layers and keep cooling on, with layers of 0.12 to 0.16 mm.
- Tent seams and rooflights
Radial seams run down the canopy, and oval rooflights ring the sloping base. Print friendly adapts these shallow reliefs at small scale; Full detail keeps them for a large print.
- One piece with the ground
The Khan Shatyr Entertainment Center is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Khan Shatyr Entertainment Center takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Khan Shatyr Entertainment Center
Khan Shatyr is an entertainment center shaped like a tent and covered in transparent material. It stands in Astana, Kazakhstan's capital. The design uses a neo-futurist style, and Nursultan Nazarbayev, the country's first president, unveiled the project on December 9, 2006. The tent itself rises 90 meters (300 ft), or 150 meters (490 ft) with the spire, over an elliptical base of 200 by 195 meters (656 ft by 640 ft).
Beneath the canopy lies a space bigger than 10 football fields, holding a park and a shopping and entertainment venue on an urban scale, with squares, cobbled streets, a boating river, shops, minigolf and an indoor beach resort. Vector Foiltec supplied the ETFE cushions, and cables hang from a central spire to carry them. Sunlight passes through the material; heating and cooling are meant to hold the main space at 15–30 °C (59–86 °F) when the air outside swings from −35 to 35 °C.
The British architect Norman Foster designed it through Foster and Partners, with Buro Happold as engineers. For Astana it was Foster's second national project, following the Palace of Peace and Reconciliation. After delays, the main mast went up in December 2008, and the complex opened on July 5, 2010.
About this model
The Khan Shatyr Entertainment Center is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
