3D print the King Hussein Mosque
A free, printable model of the King Hussein Mosque, a square building with four corner minarets, a large central dome and small domes, standing in parkland in Amman, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About the King Hussein Mosque
King Hussein Bin Talal Mosque, usually called the King Hussein Mosque, is both a mosque and a religious museum in Amman, the capital of Jordan. No other mosque in Jordan is larger. It dates from 2005, during the reign of King Abdullah II, and sits in West Amman, inside Al Hussein Public Parks, along King Abdullah II Street by the King Hussein Medical Center. At an altitude of 1,013 meters (3,323 ft) above sea level, it is visible from most parts of Amman. The building is square and has four minarets and marble floors.
Inside the mosque is the Prophet Mohammad Museum, a religious museum about Muhammad. It opened on May 15, 2012, with King Abdullah II officiating. Among the items described as his alleged belongings are a single hair from his beard, a letter he wrote to the Byzantine emperor, and a sapling of the Sahabi Tree, from a tree in the desert of Jordan, where a tradition says Muhammad rested.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 13 mm | 1:3,750 |
| 200 mm | 16 mm | 1:3,000 |
| 256 mm | 20 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Four slim corner minarets
- A tall minaret with a small domed top stands at each corner. Printing slowly and using layers of 0.12 to 0.16 mm helps keep their tops crisp.
- Arcades and a toothed parapet
- Rows of arches run along the walls under a parapet with small teeth, with several small domes on the roof. Print friendly adapts these to the print scale; Full detail keeps them, which suits a larger print.
- One piece with the ground
- The King Hussein Mosque is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The King Hussein Mosque takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
The King Hussein Mosque is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a King Hussein Mosque STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. The King Hussein Mosque grows with the print: about 13 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
