3D print Kruszyniany Mosque
A free, printable model of Kruszyniany Mosque, a small building beside a village road, with fields and scattered houses around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Kruszyniany Mosque in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 4 mm
- Scale
- 1:3,750
4 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Slim towers with small tops
The towers are slender, with small pointed tops. Print friendly adapts these tiny parts; for Full detail, print larger and slowly, with a 0.12–0.16 mm layer height.
- A small building on a wide base
The mosque is small among open fields and houses. A bigger print size keeps its shape and tower roofs readable.
- One piece with the ground
Kruszyniany Mosque is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Kruszyniany Mosque takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Kruszyniany Mosque
Kruszyniany Mosque, built of wood, sits in Kruszyniany, a village in Poland's Podlaskie Voivodeship. No other Lipka Tatar mosque in Poland is older. Its plan is a rectangle measuring 10 by 13 meters. King John III Sobieski gave the village to Tatars who had fought for the Polish–Lithuanian Commonwealth against the Ottoman Empire, and after they settled there they built a mosque, first mentioned in a document from 1717.
The present building was probably built in the latter half of the eighteenth century or the earlier half of the nineteenth; the exact date is unknown. It stands on the site of an earlier mosque. A renovation in 1846 is recorded on a stone plaque beside the women's entrance. In 2012, the village of Kruszyniany was designated one of Poland's national Historic Monuments.
Inside and out, the walls are clad in dark green painted wood, a color tied to Islam. Two towers decorate the north side, and a smaller, windowless third tower rises from the roof ridge. Each tower roof looks like a squashed helmet, with a crescent moon on top, while the main roof is shingled. The interior has separate sections for women and men, with a mihrab in the men's prayer hall, and calligraphic quotations from the Quran decorate the walls.
About this model
Kruszyniany Mosque is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Keep exploring





