3D print Liberty Hall, New Jersey
A free, printable model of Liberty Hall, a long mansion with a tower and chimneys, and the lawns around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 4 mm
- Scale
- 1:3,750
4 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Chimneys and a small tower
Several slim chimneys rise from the roof, and a small tower with an eight-sided top sits near the center. Print friendly adapts them to the print scale; a layer height of 0.12 to 0.16 mm keeps them crisp.
- Porches and steps
Small porches with steps and railings line the front and sides. Full detail keeps them, which suits a larger print or a fine nozzle.
- One piece with the ground
Liberty Hall, New Jersey is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Liberty Hall, New Jersey takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Liberty Hall, New Jersey
Liberty Hall, or the Governor William Livingston House, stands in Union, New Jersey, on Morris Avenue. William Livingston, a lawyer who became a member of both Continental Congresses and the first Governor of New Jersey, built it in 1772. It began as a fourteen-room Georgian-style house, and Alexander Hamilton lived with Livingston during the first year it was occupied. On November 28, 1972, it was designated a National Historic Landmark for its importance in politics and government.
The house grew over time. In 1870 a third story was added over the west wing and central section, along with a tower at the northwest corner. John Kean II expanded it into the fifty-room Victorian Italianate mansion it became, mainly to hold his large family, and added amenities including gas lighting, running water and a gravity hot-air heating system. The building is a frame structure over an elevated stone basement.
Several generations of the Livingston and Kean families lived here, and guests included George Washington, Martha Washington and the Marquis de Lafayette. John Jay was married in the house. Mary Alice Kean began turning it into a museum in 1949 and restored the name Liberty Hall in 1974. It is part of Kean University's Liberty Hall Campus.
About this model
Liberty Hall, New Jersey is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
