3D print the Life Savers Building
A free, printable model of the Life Savers Building, a large block with rows of windows, rooftop boxes and a notch in its roof, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 9 mm
- Scale
- 1:3,750
9 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Rooftop boxes and notch
Small boxes stand on the roof, which has a notch cut into it. Print friendly adapts the small boxes to the print scale; Full detail keeps them on a larger print.
- Rows of window frames
Many window frames and horizontal bands cover the walls. A layer height of 0.12–0.16 mm and a bigger print size keep them crisp.
- One piece with the ground
The Life Savers Building is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Life Savers Building takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Life Savers Building
In Port Chester, New York, the Life Savers Building is a historic industrial and commercial building on North Main Street, between Horton Avenue and Wilkins Avenue. Construction dates to 1920, with an expansion in 1948–1949. The five-story structure uses reinforced concrete, brick and terra cotta, and Lockwood, Greene & Co. is listed as its architect.
The Life Savers Candy Company made its candy in the building and had its headquarters there until 1984. In its peak years in the 1960s, the factory turned out up to 616 million rolls of the candy each year. Oversized replicas of Life Savers rolls once marked the foundation line but have since been removed. In 1985 the building joined the National Register of Historic Places, and in 1989 it became a condominium complex.
About this model
The Life Savers Building is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
