3D print London station
A free, printable 3D model of London station and the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
London station in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 6 mm
- Scale
- 1:3,750
6 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Low, wide station building
A station is mostly broad and low, with fine detail in roof edges and canopies. Print friendly keeps thin edges sturdy, while Full detail on a larger print preserves more of the building's outline.
- One piece with the ground
London station is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. London station takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About London station
London station (French: Gare de London) serves London, Ontario, Canada, as an important interchange between Via Rail trains on the route west from Toronto to Sarnia and Windsor. The building is large and modern and has wheelchair access. It stands at the south end of the city center, and local public transit buses connect with it.
The first passenger station on the site was finished in 1853 by the Great Western Railway (GWR). Following the 1882 amalgamation of the two companies, the station kept serving London for the Grand Trunk Railway. That original building lasted until 1935, when it was demolished to make room for a new station that the Canadian National Railway built.
The first Canadian National station was later demolished and replaced by two buildings: a three-story one at 205 York Street, finished in 1963, and a 10-story tower at 197 York Street, the CN Tower Building, which went up in 1969. The taller International-style building closed in 2000 and was imploded on February 4, 2001. The three-story 1963 building became part of the current station, and the platform area from the earlier stations was kept.
About this model
London station is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
