A white 3D print of the Madison Belmont Building, an L-shaped tower mostly hidden between much taller buildings in dense Manhattan streets.

3D print the Madison Belmont Building

A free, printable model of the Madison Belmont Building and the crowded Murray Hill blocks around it, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Madison Belmont Building model, North view North
  • Madison Belmont Building model, East view East
  • Madison Belmont Building model, South view South
  • Madison Belmont Building model, West view West

© OpenStreetMap contributors

The model you print

Madison Belmont Building in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

Real height
69 m
On a 160 mm print
20 mm
Scale
1:3,750

69 m of the Madison Belmont Building, 20 mm on your shelf

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. An L-shaped sliver among towers

    In these views taller buildings cover much of this L-shaped tower, so only its upper floors and a rooftop show. A larger print size helps the facade read.

  2. Terracotta and cornice detail

    Small ornament and a large cornice crown the upper floors. Full detail keeps them on large prints; Print friendly simplifies them at small sizes.

  3. One piece with the ground

    The Madison Belmont Building is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Madison Belmont Building takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Madison Belmont Building

In Murray Hill, Manhattan, at Madison Avenue and 34th Street (southeast corner), stands the Madison Belmont Building, a commercial building that also goes by 183 Madison Avenue. Warren & Wetmore designed it in the Neoclassical style, and it went up in 1924-1925. Its "transitional" design blends Neoclassical elements with more modern Art Deco influences. At 228 feet (69 m) tall, it has 17 stories, and a rooftop floor was added in 1953.

The building is L-shaped, with 49.4 feet (15.1 m) of its length on Madison Avenue and a longer side of 153.2 feet (46.7 m) facing 34th Street. Its facade has a base, a shaft and a capital, like a column. Showroom frames, grilles and doors of iron and bronze at the three-story base are the work of Edgar Brandt. Brick piers form the shaft, and a large terracotta cornice sits above. Inside, the lobby has bronze and marble finishes and a vaulted ceiling.

Robert M. Catts developed the tower as a showroom building for a company called Merchants & Manufacturers Exchange of New York. At first it held showrooms of silk firms in Manhattan's "Silk District." It opened on October 15, 1925. In 2011 the exterior and first-floor interior became New York City landmarks.

About this model

The Madison Belmont Building is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Outside the United States this design may still be protected; check the rules where you sell.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Same skyline

More landmarks in New York

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits