3D print the Mamaroneck Methodist Church
A free, printable model of the church and its tall spire, set on a green lot among nearby buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 9 mm
- Scale
- 1:3,750
9 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Tall, thin spire
The octagonal spire is the thinnest, tallest part of this model. Print friendly adapts it to the print scale; print larger with Full detail for a sharper point, and slow the print down near the top.
- One piece with the ground
The Mamaroneck Methodist Church is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Mamaroneck Methodist Church takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Mamaroneck Methodist Church
Mamaroneck United Methodist Church is a Methodist congregation's historic building at 546 East Boston Post Road. Mamaroneck, in Westchester County, New York, is its town. The church dates to 1859 and is in the Gothic Revival style, a single story of wood-frame construction under a gable roof.
The plan is rectangular, with a two-story wing crossing the rear that was added in 1869. A semi-engaged central tower with stylized buttresses on either side rises to an octagonal spire. The church earned a National Register of Historic Places listing in 1992.
About this model
The Mamaroneck Methodist Church is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
