3D print the Maryland State House
A free, printable model of the Maryland State House, its domed cupola and thin rod on top, ringed by a road and lawn and the streets of Annapolis, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Maryland State House in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 55 m
- On a 160 mm print
- 16 mm
- Scale
- 1:3,750
55 m of the Maryland State House, 16 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Thin lantern and rod on the dome
The domed cupola ends in a small lantern and a very thin rod. Print friendly shortens or thickens thin parts for the print scale; Full detail keeps the rod. Print slowly with good cooling for the top.
- One piece with the ground
The Maryland State House is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Maryland State House takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Maryland State House
Dating to 1772, the Maryland State House in Annapolis is the oldest state capitol in the United States that has been used continuously by a legislature. It houses the Maryland General Assembly and the governor's and lieutenant governor's offices. It was the capitol of the Congress of the Confederation in 1783 and 1784, and it hosted Ratification Day, the event that formally ended the American Revolutionary War.
Its dome is the largest wooden one in the country built without nails. A National Historic Landmark since 1960, this building is the site's third statehouse. The dome carries a balcony with a balustrade, a second octagonal drum and a lantern, and the lightning rod on top was built and grounded exactly as Benjamin Franklin, the rod's inventor, specified. The dome appears on the Maryland state quarter.
Work started in 1772 but did not finish until 1797 because the Revolutionary War intervened. Joseph Horatio Anderson designed the two-story brick Georgian structure, which stands inside State Circle. An annex built between 1902 and 1906 by the Baltimore architects Baldwin & Pennington holds the House of Delegates and Senate chambers and has a cladding of black and gold Italian marble.
About this model
The Maryland State House is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Keep exploring





