3D print MGM Grand Las Vegas
A free, printable model of the MGM Grand Las Vegas and the streets, towers and large round building around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About MGM Grand Las Vegas
The MGM Grand Las Vegas is a hotel and casino in Nevada, on the Las Vegas Strip near its southern end, where Tropicana and Las Vegas Boulevard meet. Kirk Kerkorian developed it through his company, MGM Grand, Inc. Planning started in 1989, and Veldon Simpson was the architect. It opened on December 18, 1993, alongside a theme park called MGM Grand Adventures that stood on 33 acres (13 ha) to the northeast. The resort and the park cost $1 billion in total.
When it opened, the MGM Grand had 5,005 rooms, which by room count made it the world's largest hotel at that point. Its casino, at 15,930 square meters (171,500 sq ft), was also the world's largest when the resort opened. Most of the hotel stands 30 stories high, apart from a 14-story section that began life as the Marina Hotel, which opened in 1975. That older building was folded into the MGM Grand and became its West Wing.
The resort was themed mainly around The Wizard of Oz, the 1939 MGM film. The hotel's exterior is made of green glass panels, which were originally meant to evoke Emerald City. Much of the Oz theming was removed during a renovation that began in 1996. Among its entertainment venues is the MGM Grand Garden Arena.
How it prints
Make this print opens the generator on a 1300 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 12 mm | 1:8,125 |
| 200 mm | 15 mm | 1:6,500 |
| 256 mm | 19 mm | 1:5,078 |
-
North
-
East
-
South
-
West
- Stepped dome and rooftop details
- A stepped, domed roof and small rooftop details sit along the long main block. Print friendly adapts them to the print scale; Full detail keeps them, which suits a larger print.
- Slim central tower
- A narrow tower rises above the main block near its center. Layers of 0.12 to 0.16 mm keep its edges crisp, and printing slowly helps this tall, slim part.
- One piece with the ground
- MGM Grand Las Vegas is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. MGM Grand Las Vegas takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
MGM Grand Las Vegas is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a MGM Grand Las Vegas STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. MGM Grand Las Vegas grows with the print: about 12 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
