3D print the Michigan State Capitol
A free, printable model of the Michigan State Capitol, with its domed center and wings on a green lawn and the streets and buildings around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Michigan State Capitol in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 81 m
- On a 160 mm print
- 22 mm
- Scale
- 1:3,750
81 m of the Michigan State Capitol, 22 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Dome, lantern and finial
The dome carries a ring of columns, a small lantern and a slender finial at the top. Print friendly adapts the thinnest parts to the print scale; Full detail keeps them, and a 0.12 mm layer height helps the finial.
- Columned portico and cupolas
The columned entrance porch and the small cupolas on the wings are fine details. A larger print size keeps them crisp, and printing slowly helps the top of the dome.
- One piece with the ground
The Michigan State Capitol is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Michigan State Capitol takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Michigan State Capitol
The Michigan State Capitol is the home of the state legislature, in the part of Lansing that lies in Ingham County. It sits where Capitol Avenue meets Michigan Avenue and has National Historic Landmark status. Besides the legislature's chambers and offices, it holds the governor's and lieutenant governor's ceremonial offices.
Michigan's government has used three capitol buildings; this is the third. The first stood in Detroit, and the capital moved to Lansing in 1847. Elijah E. Myers, an architect from Springfield, Illinois, was commissioned in 1872 to design the new capitol building. He used the same central dome and wing layout as the United States Capitol, and went on to design the statehouses of Colorado and Texas. Its cornerstone went in on October 2, 1873, and the building was dedicated on January 1, 1879.
The building stands 81 m (267 ft) high, measured up to the tip of the finial above the dome. The rotunda is 44.5 feet (13.6 m) across and 160 feet (49 m) high from the floor to the oculus. A restoration begun in 1989 and finished in 1992 brought back a creamy-white color for the dome and removed "half-floors" that had been added in 1969.
About this model
The Michigan State Capitol is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Keep exploring





