3D print the Mid-America Air Museum Hangars
A free, printable model of the Mid-America Air Museum hangar, a long, low building, and the open flat ground, roads and small buildings around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About the Mid-America Air Museum Hangars
Liberal, Kansas, is home to the Mid-America Air Museum, an aerospace and aircraft museum on the grounds of Liberal Mid-America Regional Airport. It is the biggest aircraft museum in Kansas. More than 100 aircraft are on view, some in the main building and others on the neighboring tarmac. A gift store plus exhibits of photographs and ephemera about regional aviation history are also there.
The museum occupies a hangar that once belonged to Beech Aircraft, which built light airplanes including the Musketeer, Baron and Duchess there in the 1960s and 1970s. The airfield began as Liberal Army Air Field, where B-24 Liberator crews trained in wartime. The museum started with a donation: Colonel Tom Thomas, Jr. gave the City of Liberal more than 50 aircraft, worth over $3 million, from his personal collection. In Ada, Oklahoma, in 1984, 38 planes went on show at its first home, named Mid America Air Group Flying Museum.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 2 mm | 1:3,750 |
| 200 mm | 3 mm | 1:3,000 |
| 256 mm | 4 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Ribbed doors and fine lettering
- Narrow ribs run along the hangar doors, and fine lettering sits on one end. Print friendly adapts tiny details like these to the print scale; Full detail keeps them, which suits a larger print.
- A long, low roof
- The building is long and low with a gabled roof, so a larger print size keeps more of its details. Layers of 0.12–0.16 mm help the roof ridge stay crisp.
- One piece with the ground
- The Mid-America Air Museum Hangars is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Mid-America Air Museum Hangars takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
The Mid-America Air Museum Hangars is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a Mid-America Air Museum Hangars STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. The Mid-America Air Museum Hangars grows with the print: about 2 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
