3D print the Presbyterian Church of Norwood
A free, printable model of the Presbyterian Church of Norwood, a church with a pointed steeple tower and a rounded end, and the lawn, road and nearby buildings around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 3 mm
- Scale
- 1:3,750
3 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Pointed steeple tower
The steeple tower and its pointed roof are the tallest, thinnest part of the church. Print slowly with good cooling, and use a 0.12–0.16 mm layer height to keep the point crisp.
- Arched windows and trim
The side walls have tall arched windows, and the gable has decorative trim. Print friendly adapts them to the print scale; Full detail on a larger print keeps more of them.
- One piece with the ground
The Presbyterian Church of Norwood is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Presbyterian Church of Norwood takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Presbyterian Church of Norwood
On Broadway, at number 701, stands the Presbyterian Church of Norwood, a historic church. The community of Norwood is in Bergen County, in the state of New Jersey.
The church dates to 1868. The National Register of Historic Places added it on February 1, 2006.
About this model
The Presbyterian Church of Norwood is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
