3D print the Moscow Choral Synagogue
A free, printable model of the Moscow Choral Synagogue in Moscow, with the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 9 mm
- Scale
- 1:3,750
9 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Dome and roof edge
The dome and roofline carry the smallest curves. Print friendly adapts them to the print scale; Full detail keeps every modeled curve for a larger print or a finer nozzle.
- Layers for the facade
The window rhythm and cornice lines are the finest vertical detail. Use 0.12–0.16 mm layers to keep them crisp.
- One piece with the ground
The Moscow Choral Synagogue is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Moscow Choral Synagogue takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Moscow Choral Synagogue
An Orthodox Jewish congregation worships at the Moscow Choral Synagogue, which occupies 10 Bolshoy Spasoglinischevsky Lane in Moscow's central Basmanny District, Russia. It ranks as the country's main synagogue, sits near the Kitai-Gorod Metro station and stands near the former Jewish settlement in Zaryadye. The building is a regional cultural heritage site in Russia.
City officials refused to allow a synagogue within Kitai-gorod, so the building went up a block beyond its walls. The community engaged Semeon Eibuschitz, an Austrian working in Moscow, in 1881. Authorities rejected his first plan but approved a revised one in July 1886, and work started on May 28, 1887. The city then ordered, in 1888, that the builders remove the dome, by then finished, and the image of the scrolls of Moses on the outside. Five years of slow work ended with another ban in 1892: the community could either sell the unfinished building or turn it into a charity.
The Russian Revolution of 1905 forced the Czarist government to lift all bans on worship. Eibuschitz had died by 1898, so Roman Klein was brought in to complete the work, and the synagogue opened in 1906. It stayed in use through the Soviet era, though the state took over sections of the original structure for secular use in 1923 and 1960.
About this model
The Moscow Choral Synagogue is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
