3D print the Troitskaya Tower
A free, printable model of the Troitskaya Tower and the surrounding streets and buildings of the Moscow Kremlin area, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Troitskaya Tower in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 80 m
- On a 160 mm print
- 22 mm
- Scale
- 1:3,750
80 m of the Troitskaya Tower, 22 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Tall tower, delicate top
The narrow top of a tall tower is its most delicate part. Print friendly adapts thin parts to the print scale, and printing slowly with good cooling helps tall thin parts.
- One piece with the ground
The Troitskaya Tower is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Troitskaya Tower takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Troitskaya Tower
In the center of the Kremlin's northwestern wall in Moscow, facing the Alexander Garden, the Troitskaya Tower (literally Trinity Tower) carries a through-passage. The architect Aloisio da Milano, an Italian called Aleviz Fryazin Milanets in Russia, built it between 1495 and 1499. No other tower in the Moscow Kremlin is taller: with its star it measures 80 meters (260 ft) on the Alexander Garden side.
Several names have been used for the tower, among them Rizopolozhenskaya, Znamenskaya and Karetnaya; in 1658 it took the name Troitskaya from the Kremlin's Troitskaya Coaching Inn. Its basement, two stories deep, served as a prison in the 16th and 17th centuries. A clock sat on top from 1585 to 1812. Fear of a Swedish invasion in 1707 led to the gun slots being enlarged for heavy cannons, and in 1935 the Soviets put a red star on top.
Before Soviet rule, an icon of the Holy Trinity was placed above the tower's outward face. Visitors reach the tower over the Troitsky Bridge, which the Kutafia Tower protects. The tower's gate is the main entrance for visitors to the Kremlin.
About this model
The Troitskaya Tower is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
