3D print the Mount Bethel Baptist Meetinghouse
A free, printable model of the Mount Bethel Baptist Meetinghouse, a plain gabled building with small porches, shown on its grassy corner beside two roads, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 3 mm
- Scale
- 1:3,750
3 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Small porches and chimneys
The two small front porches and the chimneys at each end of the roof are the finest details. Print friendly adapts them to the print scale; Full detail keeps them at larger print sizes.
- One piece with the ground
The Mount Bethel Baptist Meetinghouse is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Mount Bethel Baptist Meetinghouse takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Mount Bethel Baptist Meetinghouse
The Mount Bethel Baptist Meetinghouse, a historic church, stands in the village of Mount Bethel, at the corner of Mountainview Road and County Route 651 (King George Road). The village is part of Warren Township in New Jersey's Somerset County. It was built in 1786, and its National Register of Historic Places listing of June 3, 1976 cited its importance for architecture and religion.
The meetinghouse is a plain frame building of two and one-half stories. An older account dated it to 1761, said it was taken apart in 1785, and moved here; the later view is that the 1786 building reused part of an earlier building's structure.
The Mount Bethel Baptist congregation built it. The congregation was set up in 1767, out of the Scotch Plains Baptist Church, and was the first in Somerset County. Then, in 1960, the congregation dedicated a new church building to replace this one and left the meetinghouse.
About this model
The Mount Bethel Baptist Meetinghouse is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
