3D print the Munich Residenz
A free, printable model of the Munich Residenz, with the city streets and buildings around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 30 m
- On a 160 mm print
- 11 mm
- Scale
- 1:3,750
30 m of the Munich Residenz, 11 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A complex of wings and roofs
This is a wide, low palace of joined wings rather than a single tower, and its rooflines carry the shape. Printing larger, or choosing Full detail, keeps those roof edges crisp.
- One piece with the ground
The Munich Residenz is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Munich Residenz takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Munich Residenz
The Residenz, in central Munich, was the palace of Bavaria's Wittelsbach monarchs, and no other city palace in Germany is larger. Its oldest parts go back to 1385, when the first buildings on the site were put up and paid for by the city of Munich as a penalty after an uprising against Stephen III had failed. Over more than four centuries the palace spread until it had replaced a whole former city quarter, gathering the late Renaissance, Baroque, Rococo and Neo-Classicism.
The complex holds ten courtyards and 130 rooms in three main parts. The Königsbau stands beside the Max-Joseph-Platz, while the Alte Residenz runs towards the Residenzstraße, and the Festsaalbau faces the Hofgarten. Leo von Klenze built the Königsbau between 1825 and 1835 in the manner of the Palazzo Pitti in Florence, 30 meters high, and added the neo-classical Festsaalbau, 250 meters long, between 1832 and 1842 under King Ludwig I.
A wing of the Festsaalbau holds the Cuvilliés Theatre, rebuilt with the rest of the palace after World War II, and the Herkulessaal, a primary concert venue of the Bavarian Radio Symphony Orchestra. The palace is open to visitors, who come for its architecture, its decorated rooms and the former royal collections on display; the Treasury sits on the ground floor of the Königsbau.
About this model
The Munich Residenz is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
