3D print the Mutual Reserve Building
A free, printable model of the Mutual Reserve Building, a tall block of many stories, shown among taller towers and smaller buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 56 m
- On a 160 mm print
- 16 mm
- Scale
- 1:3,750
56 m of the Mutual Reserve Building, 16 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Dense window rows
The tall block is covered in rows of windows and small ledges. Print friendly adapts fine detail to the print scale; Full detail keeps it on a larger print, ideally with a layer height of 0.12-0.16 mm.
- A tall block among towers
The model is a tall block, so print it at a larger size or slow down so the upper floors stay clean.
- One piece with the ground
The Mutual Reserve Building is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Mutual Reserve Building takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Mutual Reserve Building
In Tribeca, Manhattan, an office block where Broadway meets Duane Street goes by three names: the Mutual Reserve Building, the Langdon Building and 305 Broadway. It has 13 stories and was constructed between 1892 and 1894. William H. Hume was the architect, Richard Deeves the builder and Frederick H. Kindl the chief structural engineer. The roof stands 184 feet (56 m) high. Its address range on Broadway is 305-309, and on Duane Street 91-99.
Hume worked in a Romanesque Revival variant that draws on Henry Hobson Richardson's work. As with a column, the facade has a base, a shaft and a capital. The east and south facades are clad in limestone. Round arches carried on rusticated stone piers fill the lowest five stories, and the top story is a small arcade too. It was among the first early skyscrapers in the city with a cage-like steel frame.
The Mutual Reserve Fund Life Association, its main tenant, gave the building its first name. The owner was the family of William Fletcher Weld, a shipping magnate. After the association went bankrupt in 1909, the building became the Langdon Building, named for the owner's son. Through the rest of the century its main tenants were in publishing and paper. From 1967 to 1980 it housed the first long-term headquarters of New York City's Landmarks Preservation Commission. The city designated it a landmark in 2011.
About this model
The Mutual Reserve Building is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
