3D print the North Reformed Church

50 m of the North Reformed Church, 14 mm on your shelf

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

1. A tall, thin spire

   The spire is the slimmest part of this model. Print friendly adapts it to the print scale; Full detail keeps it on larger prints. Printing slowly with good cooling helps tall thin parts.

2. One piece with the ground

   The North Reformed Church is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

3. Pick the detail for your nozzle

   In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

4. Colors

   Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The North Reformed Church takes the building color.

5. File format

   You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.