3D print the NTT Docomo Yoyogi Building
A free, printable model of the NTT Docomo Yoyogi Building, a tall skyscraper, with the surrounding city buildings of Shibuya, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 240 m
- On a 160 mm print
- 73 mm
- Scale
- 1:3,750
240 m of the NTT Docomo Yoyogi Building, 73 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A tall tower
A tall tower like this prints best at a larger size if the height allows. Print slowly with good cooling, and use 0.12–0.16 mm layers to keep the vertical edges clean.
- One piece with the ground
The NTT Docomo Yoyogi Building is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The NTT Docomo Yoyogi Building takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the NTT Docomo Yoyogi Building
The NTT Docomo Yoyogi Building is a skyscraper in Sendagaya, part of Shibuya in Tokyo. Its height of 240 meters (790 ft) makes it Tokyo's ninth tallest building. The NTT Docomo group owns it. Despite the name, it is not the company's head office, whose headquarters occupy the Sannō Park Tower's top floors; it holds some offices but is mainly used for technical equipment for its cellular telephone service.
NTT Docomo marked its 10th anniversary with a 15-meter-diameter clock that began operating in November 2002. Solar energy supplies part of the building's power. A garbage separation system inside the tower reduces waste and raises the recycling rate. Waste water is recycled, and rainwater is used for the building's toilets. The building opened in September 2000 and has 27 floors above ground. It has a gross floor area of 51,122 square meters.
About this model
The NTT Docomo Yoyogi Building is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
