A white 3D print of the Old Faithful Inn, a long building with steep roofs and a tall central roof, with roads and small streams winding across the ground around it.

3D print the Old Faithful Inn

A free, printable model of the Old Faithful Inn with its long wings and the roads and streams around it, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Old Faithful Inn model, North view North
  • Old Faithful Inn model, East view East
  • Old Faithful Inn model, South view South
  • Old Faithful Inn model, West view West

© OpenStreetMap contributors

The model you print

Old Faithful Inn in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
11 mm
Scale
1:3,750

11 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Steep roofs and the roof ridge

    The tall central roof and its thin ridge are the most delicate part. Print tall thin parts slowly with good cooling, and use a layer height of 0.12-0.16 mm to keep the roof lines crisp.

  2. Long wings on uneven ground

    The two long wings spread across the sloping ground and streams. A bigger print keeps the small roof gables on the wings; Print friendly simplifies them on a small print.

  3. One piece with the ground

    The Old Faithful Inn is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Old Faithful Inn takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Old Faithful Inn

Inside Yellowstone National Park in Wyoming, the Old Faithful Inn operates as a hotel that looks toward the geyser called Old Faithful. It sits in the western part of the park, at an elevation of about 7,350 feet (2,240 m). A multi-story log lobby forms its center, with long frame wings of guest rooms on either side. Its builders used mostly local materials, among them lodgepole pine and rhyolite stone.

The architect was Robert Reamer, who was 29 years old, working for the Yellowstone Park Company. Initial construction took place over the winter of 1903-1904, and the inn opened in the spring of 1904 with electric lights and steam heat. Each wing was later lengthened, the east one in 1913-14 and the west one in 1927, giving the whole building a total length of almost 700 feet (210 m). The old part is turned 90 degrees from the geyser so the entrance porch frames the view of it.

The lobby is a tall gabled log structure under a deep, steeply pitched shingled roof, and the crown of its gable is 92 feet (28 m) over the lobby floor. Twisted and curved branches support the framing, and a massive 500-short-ton (450-metric-ton) stone fireplace anchors the interior. The inn is an example of National Park Service Rustic architecture, one of the few log hotels standing in the United States, and a National Historic Landmark since 1987.

About this model

The Old Faithful Inn is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Outside the United States this design may still be protected; check the rules where you sell.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Keep exploring

More landmarks to print

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits