A white 3D print of Old First Presbyterian Church, a church with a clock tower and slender spire beside an ornate tall building.

3D print Old First Presbyterian Church, Newark

A free, printable model of Old First Presbyterian Church, a church with a clock tower and slender spire beside an ornate tall building, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Old First Presbyterian Church, Newark model, North view North
  • Old First Presbyterian Church, Newark model, East view East
  • Old First Presbyterian Church, Newark model, South view South
  • Old First Presbyterian Church, Newark model, West view West
On a 160 mm print
15 mm
Scale
1:3,750

15 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Tall slender steeple

    A narrow spire rises above the clock tower. Print slowly with good cooling and 0.12–0.16 mm layers; Print Friendly keeps the tip sturdy, and a larger print or Full detail keeps its point.

  2. One piece with the ground

    Old First Presbyterian Church, Newark is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  3. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  4. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Old First Presbyterian Church, Newark takes the building color.

  5. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About Old First Presbyterian Church, Newark

Old First Presbyterian Church, in Newark, New Jersey, in Essex County, goes by other names too: First Presbyterian Church and Cemetery, and later First Church Newark. The National Register of Historic Places listed it in 1972. Its grounds, which hold an old burial ground, lie in the Four Corners Historic District.

Several public figures are buried there. William Burnet (1730–1791) was a physician who sat in the Continental Congress for New Jersey in 1780 and 1781. Thomas Ward (1759–1842) was a US representative for New Jersey's 1st district, 1813 to 1817. Silas Condit (1778–1861) was also a US representative for New Jersey, serving 1831 to 1833. Thomas M. Woodruff (1804–1855) also served in Congress, for New York's 5th district, 1845 to 1847.

About this model

Old First Presbyterian Church, Newark is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Same skyline

More landmarks in Newark