3D print St. Columba's Church, Newark
A free, printable model of St. Columba's Church, a church with a tall bell tower and a long steep roof, among city streets and low buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 13 mm
- Scale
- 1:3,750
13 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Bell tower and spire
A tall tower with a small spire stands at the front. Print friendly adapts thin parts like this to the print scale; Full detail keeps them on a larger print. Printing slowly helps the tip.
- Long steep roof
A long gabled roof runs over the nave. A layer height of 0.12-0.16 mm and a bigger print size keep its edges crisp.
- One piece with the ground
St. Columba's Church, Newark is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. St. Columba's Church, Newark takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About St. Columba's Church, Newark
In Newark, New Jersey, St. Columba's Church is a Roman Catholic parish church of historic interest. It belongs to the Archdiocese of Newark, and its location is the junction of Pennsylvania Avenue and Brunswick Street, in Essex County, in the United States.
The church was built in 1871 and rebuilt in 1898. A National Register of Historic Places listing for it dates from 1972, and the entry is dated October 30, 1972. The two building dates mark its original construction and its later rebuilding.
About this model
St. Columba's Church, Newark is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
